XANTREX Freedom Marine 30 charger/Inverter with REMOTE!
Home and Garden :: Electrical and Solar
XANTREX Freedom Marine 30 charger/Inverter with REMOTE!
This unit works 100%... It is MODIFIED SINEWAVE… It was used on a houseboat, and was replaced only because we upgraded to a more powerful “Outback” system. It comes with an OWNERS MANUAL, and FREEDOM REMOTE ($125.00 value) along with its owners manual… scroll down for remote description… Heart Interface Freedom Marine 30 Inverter/Charger Modified Sine wave ($1680.00 retail) Description AC Power Inverter with High Surge Capability, 3-Stage Charger With filtered modified sine wave output, Freedom Marine inverter/chargers run virtually anything on your boat, from office equipment to household appliances and electronics. Temperature controlled multistage charging ensures that your batteries are recharged safely and efficiently. Its integrated transfer switch allows for automatic change-over between shorepower and inverter. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom Marine inverter/chargers can be paired with optional Link instrumentation. Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Multiple battery bank charging from the built in 15 A echo~charge Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link panels Aluminum chassis ideal for marine environment Includes battery temperature sensor Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Freedom Marine 30 Specifications Electrical Specifications - Inverter Output power (continuous) 3000 W Surge power (AC amps) 75 A Output frequency regulation 60 Hz, quartz regulated Inverter voltage regulation 120 V +/-5% true RMS Output wave form Modified sine wave Efficiency (full load) 86% Peak efficiency 93% No load current draw (idle mode) 0.12 A AC transfer switch 30 A Electrical Specifications - Charger Charge rate 140 A DC AC input voltage range 90 − 130 VAC Battery voltage (nominal) 12 VDC Battery voltage range 10.0 − 15.5 VDC Low battery cut-out 10.0 VDC AC input (max. charge mode) 28 A AC Bulk charge voltage 14.4 VDC Float charge voltage 13.5 VDC Equalize charge voltage 16.3 VDC Battery charge outputs 3 Charge control 3-stage Battery type settings Wet/Gel 1/Gel 2/AGM Equalization Yes Temperature sensitive charging Yes General Specifications Optimal operating temp. range 32°F − 104°F (0°C − 40°C) *derated below 0°C and above 40°C Optional remotes Freedom Basic Remote or Link instrumentation Dimensions (H x W x L) 7.9 x 11.5 x 13.2” (201 x 292 x 335 mm) Weight 50 lb (23 kg) Part numbers 81-3011-12 84-2056-01 (Freedom Basic Remote) 84-2019-02 (Link 1000) 84-2000-06 (Link 2000) XantrexFreedom RemoteBattery Status and Freedom Inverter/Charger Remote Control ($125.00 value) Provides Valuable Inverter/Charger System Monitoring and Control The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel. Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install Specifications Voltage bar graph 10.0 - 15.5 VDC DC amps bar graph Idle mode = off Loaded = <10 - 300 DC amps Operating temperature range 32° F to 158° F (0° C to 70° C) Compatible battery types wet/gel/AGM Design Splash resistant Dimensions (H x W x L) 5.5 x 3.75 x 1.75" (140 x 95 x 44 mm) Cutout size: (H x W) 4.875 x 2.875" (116 x 73 mm) Weight 3 oz (85 g) Part number 84-2056-01 | ||||||||||||
Alternative and Solar Energy
Circuit Breakers and Fuse Boxes
Connectors and Ties
Extension Cords
Switches and Outlets
Other Electrical and Solar
Home
Site map