Xantrex DR2412 Inverter/Charger

Xantrex DR2412 Inverter/Charger

Start price	650.0 USD
Current price	650.0 USD
Start time	09/04/2008
End time	09/08/2008
Bid count	0
See more about Xantrex DR2412 Inverter/Charger

Xantrex DR2412 Inverter/Charger, 12V 2400W Retail Price: $1,100.00 You Pay:      $650.00 The DR Inverter/Charger provides dependable modified sine wave power for businesses, homes and workshops. Available in 1500, 2400 or 3600 watt models, it can power most common electrical appliances such as lights, televisions, cash registers, refrigerators, washing machines, computers, and power tools. The DR’s high surge capacity gives it the ability to start difficult motor loads. Once set up, all functions of the inverter/charger are fully automatic. Product Features AC input voltage 120V 60Hz AC input current 55A: 30A AC pass-through and 25A AC charging Continuous power rating at 25 deg C 2400W Surge capacity 4200W for 5 secs Output voltage 120V AC 60Hz Automatic transfer relay 30A DC input voltage 12.6V DC current draw at rated inverter power 280A Maximum charge rate 120A Manufacturer: Xantrex   Electrical Specifications   AC Input Voltage   120 VAC   AC Input Low Transfer Voltage   40-105 VAC   AC Input Current   55 amps AC - 30 amps AC pass through and 25 amps AC charging   Continuous Power (@ 25 °C)   2400 VA   Efficiency (peak)   94%   Output Voltage (RMS)   120 VAC   Maximum Output Voltage Regulation   +/- 5%   Frequency (nominal)   60 Hz   Continous Output (@ 25°C)   20 amps AC   5 Sec Rating Surge Capability   4200 watts   1 mSec Surge Capability   77 amps AC   100 mSec Surge Capability   55 amps AC   Automatic Transfer Relay   30 amps   DC Input Voltage (nominal)   12.6 VDC   DC Input Voltage Range   10.8-15.5 VDC   DC Current at Rated Power   280 amps DC   Short circuit current   800 amps DC   Idle Consumption (typical at full voltage)   < 12 watts   Search Mode Consumption   < 1 watt   Low Battery Protection (enabled)   11 VDC   Maximum Charge Rate (adjustable)   120 amps DC   Waveform   Modified Sine Wave   Load Sensing (inverter mode)   Adjustable 5 to over 100 watts   General Specifications   Specified Temperature Range   32 °F to 104 °F (0 °C to 40 °C)   Enclosure Type   Indoor, ventilated, steel chassis with powder coat finish   Unit Weight   45 lb (21 kg)   Shipping   49 lb (22 kg)   Dimensions (H x W x D)   8.5 x 22 x 7.25" (21.6 x 55.9 x 18.4 cm)   Shipping Dimensions (H x W x D)   13 x 25 x 12" (33 x 63.5 x 18.4 cm)   Mounting   Horizontal wall mount   Warranty   2 years   Part Numbers   DR2412       DRI - optional, stacking interface cable       DRCB - optional, conduit box       RC8 - optional, remote       BTS - optional, battery temperature sensor   Features & Options   Forced Air Cooling   Standard forced air variable speed fan   Charging Profiles   Eight standard with two equalize profiles   Three-stage Charging   Standard three-stage (bulk, absorption, and float)   Series Stacking Operation   Standard for 120 VAC 60 Hz units only - Requires two units   Battery Temperature Sensor   BTS - optional remote battery temperature sensor for increased battery performance   Remote Control   RC8 - optional remote control and status indicator   Stacking Interface   DRI - optional stacking interface cable for 120/240 VAC 60 Hz applications   Conduit Box   DRCB - optional side mount conduit box for code-compliant DC wiring connections   Regulatory Approvals   ETL Listed to UL 1741 and CSA 22.2 No 107.1 Standards