Xantrex DR 3624 Inverter\Charger

Xantrex DR 3624 Inverter\Charger

Start price	800.0 USD
Current price	800.0 USD
Start time	09/02/2008
End time	09/09/2008
Bid count	0
See more about Xantrex DR 3624 Inverter\Charger

Your Buying a Brand New, Never been Used Xantrex DR 3624 InverterRetail Price: $1,250.00You Pay:       $800.00  !!!!!!!!!!   Electrical Specifications   AC Input Voltage   120 VAC   AC Input Low Transfer Voltage   40-105 VAC   AC Input Current   55 amps AC - 30 amps AC pass through and 25 amps AC charging   Continuous Power (@ 25 °C)   3600 VA   Efficiency (peak)   95%   Output Voltage (RMS)   120 VAC   Maximum Output Voltage Regulation   +/- 5%   Frequency (nominal)   60 Hz   Continous Output (@ 25°C)   30 amps AC   5 Sec Rating Surge Capability   7500 watts   1 mSec Surge Capability   100 amps AC   100 mSec Surge Capability   72 amps AC   Automatic Transfer Relay   30 amps   DC Input Voltage (nominal)   25.2 VDC   DC Input Voltage Range   21.6-31 VDC   DC Current at Rated Power   210 amps DC   Short circuit current   720 amps DC   Idle Consumption (typical at full voltage)   < 13 watts   Search Mode Consumption   < 1 watt   Low Battery Protection (enabled)   22 VDC   Maximum Charge Rate (adjustable)   70 amps DC   Waveform   Modified Sine Wave   Load Sensing (inverter mode)   Adjustable 5 to over 100 watts   General Specifications   Specified Temperature Range   32 °F to 104 °F (0 °C to 40 °C)   Enclosure Type   Indoor, ventilated, steel chassis with powder coat finish   Unit Weight   45 lb (21 kg)   Shipping   49 lb (22 kg)   Dimensions (H x W x D)   8.5 x 22 x 7.25" (21.6 x 55.9 x 18.4 cm)   Shipping Dimensions (H x W x D)   13 x 25 x 12" (33 x 63.5 x 18.4 cm)   Mounting   Horizontal wall mount   Warranty   2 years   Part Numbers   DR3624       DRI - optional, stacking interface cable       DRCB - optional, conduit box       RC8 - optional, remote       BTS - optional, battery temperature sensor   Features & Options   Forced Air Cooling   Standard forced air variable speed fan   Charging Profiles   Eight standard with two equalize profiles   Three-stage Charging   Standard three-stage (bulk, absorption, and float)   Series Stacking Operation   Standard for 120 VAC 60 Hz units only - Requires two units   Battery Temperature Sensor   BTS - optional remote battery temperature sensor for increased battery performance   Remote Control   RC8 - optional remote control and status indicator   Stacking Interface   DRI - optional stacking interface cable for 120/240 VAC 60 Hz applications   Conduit Box   DRCB - optional side mount conduit box for code-compliant DC wiring connections   Regulatory Approvals   ETL Listed to UL 1741 and CSA 22.2 No 107.1 Standards